Product ID:LACQUER CAMOUFLAGE WHITE 37875 ID 787719
MSDS Date:08/11/1992
FSC:8010
NIIN:00-166-3152
MSDS Number: BQCNT

PRATTVILLE BUILDERS INC

474 E MAIN ST
PRATTVILLE, AL 36067
US

Emergency Phone: 205-365-2396/2145/312-455-2662NIGHT

Info Phone: 205-365-2396/2145/312-455-2662NIGHT

Preparer: W A ELLISON

Cage: 0EAH4

PRATTVILLE BUILDERS INC

2153 PRATTVILLE, AL 36067 US

Telephone: 205-365-2396/2145/312-455-2662NIGHT

Cage: 0EAH4

ISOBUTYL ACETATE (SOLVENT) (SARA III) (LFL 2.0, UFL 11.0)

CAS: 110-19-0

RTECS: AI4025000

Fraction By Weight: 20%

OSHA PEL 150 PPM/ 700 MG/M3

ACGIH TLV: 150 PPM/ 700 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ISOPROPYL ALCOHOL (SOLVENT) (SARA III) (LFL 2.0, UFL 13.0)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 5%

OSHA PEL 400 PPM/STEL 500 PPM

ACGIH TLV: 400 PPM/STEL 500 PPM

NITROCELLULOSE (RESIN)

CAS: 9004-70-0

RTECS: QW0970000

Fraction By Weight: 5%

ISOBUTYL ALCOHOL (SOLVENT) (SARA III) (LFL 1.0, UFL 11.0)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TITANIUM DIOXIDE (PIGMENT)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

TOLUENE (SOLVENT) (LFL 1.7, UFL 7.1) (VAPOR PRESSURE 22 MM

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

XYLENE (SOLVENT) (SARA III) (LFL 1.0, UFL 7.0) (VAPOR

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5%

OSHA PEL 100 PPM/STEL 150 PPM

ACGIH TLV: 100 PPM/STEL 150 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SILICA, CRYSTALLINE - CRISTOBALITE (PIGMENT)

CAS: 14464-46-1

RTECS: VV7325000

Fraction By Weight: <5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.05 MG/M3 RDUST9293

TALC (PIGMENT)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 10%

OSHA PEL 2 MG/M3/20 MPPCF

ACGIH TLV: 2 MG/M3/ 15 MPPCF

ETHYL BENZENE (SARA III) (VAPOR PRESSURE 1 MM HG @ 20C)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <5%

OSHA PEL 100 PPM/STEL 125 PPM

ACGIH TLV: 100 PPM/STEL 125 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TRIARYL PHOSPHATE

CAS: 68937-41-7

Fraction By Weight: 5%

TRIPHENYL PHOSPHATE (VAPOR PRESSURE 1 MM HG @ 20C)

CAS: 115-86-6

RTECS: TC8400000

Fraction By Weight: <1%

OSHA PEL 3 MG/M3

ACGIH TLV: 3 MG/M3

VOC 5.06 LB/GAL LESS WATER & NEGLIGIBLY PHOTOCHEMICALLY

RTECS: 9999999VO

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:UNKNOWN IARC:YES
Health Hazards Acute and Chronic:INGEST: GI IRRIT, NAUSEA, VOMITING.
ASPIRATION OF MAT'L INTO LUNGS, CHEM PNEUMONITIS. INHAL: NOSE,
THROAT IRRIT. CNS DEPRESSION. EYE: IRRIT. SKIN: IRRITANT.
Explanation of Carcinogenicity:IARC CONSIDERS CRYSTALLINE SILICA TO
HAVE LIMITED EVIDENCE OF CARCINOGENICITY IN HUMANS & SUFFICIENT
EVIDENCE IN ANIMALS
Effects of Overexposure:CHRONIC: LIVER, LIVER, & BLOOD INJURY.
PROLONGED AND REPEATED OCCUPATIONAL OVEREXPOSURE TO SOLVENTS MAY
CAUSE PERMANENT BRAIN AND CNS DAMAGE. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING AND INHAL ING THE CONTENTS MAY BE
HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:PREEXISTING RESPIRATORY CONDITIONS
MAY BE AGGRAVATED BY EXPOSURE TO CRYSTALLINE SILICA.

First Aid:INGEST: DONT INDUCE VOMIT. CALL POISON CNTRL CTR, EMERG ROOM,
DR IMMED. INHAL: REMOVE TO FRESH AIR IMMED. IF BREATHING STOPPED,
GIVE ARTIF RESP. KEEP WARM & QUIET. GET IMMED MED AID. EYE: FLUSH
W/WATE R (LIFT EYELID) 15MIN. GET MED AID. SKIN: IMMED FLUSH CONTAM
AREA W/ LRG AMT WATER. REMOVE CONTAM CLOTHES AS WATER APPL'D. SEE
DR. NOTE TO DR: DIRECT TREATMENT AT CONTROL OF SYMPTOMS/CLINICAL
CONDITIO

Flash Point:40.0F,4.4C
Autoignition Temp:Autoignition Temp Text:300 C
Lower Limits:1.0
Upper Limits:13.0
Extinguishing Media:USE NFPA CLASS B FIRE EXTINGUISHERS (CO2, ALL
PURPOSE DRY CHEM/ALCOHOL FOAM). POLYMER FOAM PREFERRED FOR LARGE
FIRES.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, USE TO COOL (FOG
NOZZLES PREFERRED) EXPOSED CNTNRS TO PREVENT PRESSURE BUILDUP, AUTO
IGNITION OR EXPLOSION W/EXTREME HEAT.
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY
NOT BE IMMEDIATELY APPARENT. OBTAIN MEDICAL AID.

Spill Release Procedures:KEEP SPECTATORS AWAY. ELIMINATE IGNIT SOURCES.
DIKE & CONTAIN W/INERT MAT'L. TRANSFR LIQ TO COVERED METAL CNTNR.
USE ONLY NON-SPARKING TOOLS. PLACE ABSORBENT DIKING MATERIALS IN
COVERED METAL CNTNRS. PREVENT SEWER,STREAM,GROUNDWATER
CONTAMINATION.

Handling and Storage Precautions:DO NOT STORE ABOVE 115F. STORE LRG QTY
IN COMPLIANCE WITH OSHA 29CFR1910.106. DO NOT TAKE INTERNALLY.
CLOSE CNTNR AFTER EACH USE.
Other Precautions:DONT BREATHE SANDING DUST. EMPTY CONTAINERS MUST NOT
BE WASHED & REUSED. GROUND/BOND CONTAINERS TO RECEIVING CONTAINER.
DONT WELD, BRAZE OR CUT ON EMPTY CONTAINER. NEVER USE PRESSURE TO
EMPTY. DRUM IS NOT PRESSURE VESSEL.

Respiratory Protection:MAY NOT REQ RSPRTR IF VENTED. RESTRICTED VENT,
NIOSH CHEM CARTRIDGE RSPRTR. SPRAYING, MECHANICAL PREFILTER TOO.
CONFINED, NIOSH/MSHA AIR SUPPLD RSPRTR. IF ABOVE TLV USE FITTED
NIOSH/MSHA RSPRTR W/ APP ROP PROTECTION FACTOR. SEE 29 CFR1910.13
Ventilation:GENRL DILUTN & LOCAL EXHAUST TO KEEP CONC BELOW TLV. REMOVE
DECOMP PROD GENERATED WHEN WELD,CUT,BRAZE COATED OBJECTS.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES-REPEAT/PROLNG
Eye Protection:SAFETY SPECTACLES
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Supplemental Safety and Health

HCC:F2
Boiling Pt:B.P. Text:180 TO 518F
Melt/Freeze Pt:M.P/F.P Text:-50F,-46C
Decomp Temp:Decomp Text:1832F,1000C
Vapor Pres:33 @ 68F
Vapor Density:> AIR
Spec Gravity:1.1
pH:4-7STD
Viscosity:>200 CST
Evaporation Rate & Reference:SLOWER THAN DIETHYL EHTER
Solubility in Water:SLIGHT IN WATER
Appearance and Odor:LIQUID, SOLVENT ODOR
Percent Volatiles by Volume:71

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (>115F) AND SOURCES
OF IGNITION.
Hazardous Decomposition Products:BURNING, INCLUDING WHEN HEATED BY
WELDING/ CUTTING: SMOKE, CO, CO2, OXIDES OF NITROGEN MAY BE
GENERATED.

Waste Disposal Methods:DISPOSE IN ACCORD W/FED, STATE & LOCAL
LAWS/REGS. INCINERATE IN EPA PERMITTED FACILITY. DONT INCINERATE
CLSD CNTNR. OBSERVE PRECAUTION FOR DISPOSAL OF FLAMM MAT'L. DISPOSE
CONTAM ABSORB IN HZD WASTE L ANDFILL. RCRA CLASSIFICATION WOULD BE
D001.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.